311 matches for the search term(s) "proto hollow shaft nutdriversviewquickview"

Shaft collars are machine components featuring a simple design that consists of a round metal or plastic ring with a clamp screw and/or screws. Tightening the screws causes the ring to tighten or loosen around the shaft. When securely tightened, shaft collars can serve as mechanical stops or hold components ...

Shaft Collars for Precision Applications The shaft collar is commonly used in machine applications to hold different mechanical components in place. Shaft collars are made up of a round metal or plastic ring with a clamp and/or screws to tighten the ring around a component to hold it in place. ...

Stafford Rigid Shaft Couplings and Shaft Adapters are designed to join shafts of different sizes and configurations, extend shafts, and provide different mating options. Allowing drive system modifications without the need for major redesigns, welding, and replacement shafts, they are available in a variety of configurations made from steel, stainless ...

2-Piece Clamp-Type Shaft Collars are for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. They can be completely disassembled and placed anywhere on a shaft. Precision machined, non-marring, easy to adjust, with high clamping power, they are stocked ...

2-Piece Clamp-Type Shaft Collars with Keyways are for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. They can be completely disassembled and placed anywhere on a shaft. Precision machined, non-marring, easy to adjust, with high clamping power.

2-Piece Clamp-Type Shaft Collars with Set Screw are for use on standard round shafts. They can be completely disassembled and placed anywhere on a shaft. Precision machined, easy to adjust, with high clamping power.

2-Piece Clamp-Type Shaft Collars are designed for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. They can be completely disassembled and placed anywhere on a shaft. They are precision machined, non-marring, easy to adjust, with high clamping power.

Available only from Stafford, the Hinge Collar features a triple-link hinge and captive screw in one unit, combining the flexibility of the two-piece collar with the simplicity of the one-piece. They are easy to assemble, reposition, and take apart; eliminating fumbling, lost screws and wasted time. Hinge Shaft Collars provide ...

Stafford’s line of weldable shaft collars and couplings are now offered in weldable stainless steel and include hinged collars and flange mounts that can be easily modified to improve design options. Available in one-piece, two-piece and hinged styles, Stafford weldable shaft collars and flange mounts come in 1/4” to 6” ...

Stafford Shaft Adapters are rigid couplings with a clamp-type female end that fits securely over an output shaft and feature male ends which can be supplied in various lengths and ends to solve shaft compatibility problems. Providing a host of solutions, these adapters are offered in step-up and step-down configurations ...

UNF/UNC 2-Piece Threaded Collars are used on standard threaded shafts, either UNF (fine thread) or UNC (coarse thread). They can be completely disassembled and placed anywhere on a shaft. They are precision machined, non-marring, easy to adjust, with high clamping power. Stocked in: Steel Stainless Steel Offered in two styles: ...

UNF/UNC 2-Piece Threaded Collars are used on standard threaded shafts, either UNF (fine thread) or UNC (coarse thread). They can be completely disassembled and placed anywhere on a shaft. They are precision machined, non-marring, easy to adjust, with high clamping power. Stocked in: Steel Stainless Steel Offered in two styles: ...

ACME Threaded Collars are used on standard ACME threaded shafts, either left or right hand thread). They are perfect for applications such as stroke limiting, stops, and height and spring tensioning. The 2-Piece Clamp-Type design allows the collars to be completely disassembled and placed anywhere on a shaft. They are ...

Designed for use on standard UNF shafts, Threaded Hub Collars feature a precision-machined hub on the face that limits the contact area, minimizing friction. They are ideally suited as a bearing inner-race. Non-marring, easy to adjust, with high clamping power, they can be completely disassembled and placed anywhere on a ...

Stafford’s new line of machined Square Bore Two-Piece Shaft Collars mount on to square shafts and tubing for attaching a wide range of items. Stafford Square Bore Mounting Collars are available machined from steel, stainless steel, aluminum, and plastics to fit square shafts and structural tubing from 1/2” to 2” ...

1-Piece Clamp-Type Shaft Collars are for use on standard round shafts, hard or soft, as well as on thin wall tube or over a split hub. Precision machined, non-marring, easy to adjust, with high clamping power, they are stocked in the following materials: Steel Stainless Steel Aluminum Nylon Delrin

Discover the versatility of Rigid Couplings connecting both supported and unsupported shafts. Explore designs with straight or stepped bores, ideal for mixers, pumps, and various power transmission applications.